PVC Ceiling Film Installation and Maintenance Guide: Common Problem Solving and Service Life Extension Strategies
PVC Ceiling Film Installation and Maintenance Guide
-- Common Problem Solving and Service Life Extension Strategies
1. Preparation before Installation
Inspection and Treatment of the Base
Ensure that the ceiling is flat, dry, and free of cracks or peeling (uneven areas need to be repaired with putty).
Remove dust and oil stains to avoid affecting the adhesion of the glue.
Environmental requirements
The room temperature is recommended to be between 10°C and 35°C, and the humidity is ≤70% to prevent the material from expanding and contracting.
Tools and Materials
Need to prepare: PVC special glue, utility knife, roller, tape measure, laser level, etc.
2. Installation Steps
Measurement and Cutting
Reserve 5~10cm margin according to the actual size to avoid splicing errors.
Use a sharp blade to cut and ensure neat edges.
Gluing and Pasting
It is recommended to apply glue evenly by "dot coating" or "strip coating" and let it stand for 1~2 minutes (the glue will be more firmly pasted after it dries slightly).
Lay from the center to the surroundings and use a roller to remove bubbles.
Joint treatment
The joints need to overlap 1~2cm, soften with a hot air gun and flatten to form a seamless effect.
3. Common problems and solutions
| Issue |
Cause |
Solution |
| Edge lifting |
Insufficient adhesive or uneven substrate |
Reapply adhesive and press firmly, or trim and reattach the lifted section |
| Surface bubbles |
Inadequate air removal or uneven adhesive application |
Puncture bubbles with a needle, inject adhesive and flatten |
| Visible seams |
Uneven cutting or low temperature during installation |
Reheat the seam area and reinforce with a pressure roller |
| Local discoloration |
Moisture exposure or prolonged UV radiation |
Select UV-resistant products and avoid humid environments |
| Adhesive residue |
Excess adhesive not cleaned promptly |
Wipe immediately with alcohol pads before adhesive dries |
| Complete detachment |
Poor substrate preparation or adhesive failure |
Thoroughly clean substrate and reinstall using high-temperature resistant adhesive |
4. Maintenance and life extension strategies
Daily cleaning
Wipe with a soft cloth dipped in a neutral detergent. Steel wool or strong acid and alkali detergents are prohibited.
Avoid physical damage
Do not scratch with sharp objects. Heavy objects need to be hung with a special bracket.
Environmental control
Keep the room ventilated. The dehumidifier can be turned on during the rainy season to prevent mildew.
Regular inspection
Check the joints and edges every six months. If the glue is found to be debonded, it should be repaired in time.
5. Factors affecting life
High-quality materials: Choose a PVC film with a thickness of ≥0.2mm and UV resistance, which can reach a life of 8~15 years.
Construction quality: Professional installation can reduce the cost of later maintenance.
Use environment: A model with stronger weather resistance should be selected in high temperature and high humidity areas.
-2-1.png?imageView2/2/format/jp2)
English
中文简体
русский
Español
Français
عربى
